OBD 2 Engine Scanner Code Reader II　2006/03/07
I got the OBD 2 Engine Scanner Code Reader for my DIY troubleshooter, because Japanese spec C doesn't have a MIL(Malfunction indicator lamp) .




I got the Code Reader and 2x2 adapter from an ebay today.

Features of the Code reader.

1. Reading trouble codes,
2. Erase DTC automatically,
3. Delicate design for portable operation
4. Plug Play, easy to use
5. Read all DTC complied with OBD-2 standard conveniently
The OBD port are located under the gearshift boot console.
But my OBDI port is the 2x2 ealy tipe connecter.

I need the 2x2 adaptor for connect to new type connector.
I installed the 2x2 adaptor to center console for easy connecting newer connector.
Auto scanner is specially designed for car owners or DIY.

Only connect OBD port!
Immediately, reading...

I got following fault code and checking out trouble causes with attached USER MANUAL.

0214 Supply voltage
011b Speed sensor front left-G47
0122 Speed sensor rear left-G46
011F Speed sensor rear right-G45
0223 Pressure control switch for ABS-F137
0257 Plausibility pres/brake light switch
0201 Engine speed sender-G28

Displayed the fault code of the ABS relation.
・・・・I removed an ABS unit already. reset foult code!!

2006/03/09 After resetting a fault code, it displayed a fault code 0214 again.
I forgot remove the ABS control unit, I must remove the ABS contol unit for elase that foult code.
Reading fault code video.





Back